Single/dual /4-way grounding block
Material
Impedance : 75 ohms
Frequency : 5 to 2,350MHz
Insertion Loss: 5 to 1,200MHz≤0.2dB
                      1,201 to 2,500MHz≤1.5dB
High performance utilize a zinc base and brass splice to achieve 3/8-2a-UNEF thread quality

• High quality, digital broadband performance to 3GHz
• 360 degrees round seizing pins maximize center conductor surface contact thereby significantly reducing contact resistance
• Reduced aperture flat-ended ports on both ends comply to SCTE IPS-SP-406 standard to maximize connector shield to connector surface contact and reduce moisture migration
• Return loss over -30dB up to IGHz exceeds SCTE return loss standard
• Less then 0.05dB insertion loss typical to IGHz provided unsurpassed performance in digital environments

Technical advantage:
1, corrosion resistance, corrosion resistance, grounding ability with time and increase gradually, effectively use more than 50 years, the grounding body, with moisture absorption, moisturizing, good stability, grounding resistance from seasonal effect, ion onto a 3-5 meters underground in the soil, can improve soil properties, near the lower soil resistivity, and quickly.
2, grounding, use the same graphite materials, avoid the traditional copper wire reinforcement and stolen.
3, and ordinary, galvanized steel grounding resistance small compared to three times KaiWaLiang earthwork, small five times, no use electric welding, avoid shock and burns, save steel wire, complete with cost allocation, the fast installation, need only 1 minute.
4. and grounding electrode and, when the connection grounding body is ready, no electric welding, avoid the risk of electric shock and burns.
According to different regions,
5, the soil resistivity chooses different types, only need a ground terminal body, can satisfy the requirements, no more parallel

contact us:

Tel:0086-574-88453997

Fax :0086-574-88454076

Post code:315191

Email :info@connector-e.com

 Url: www.connector-e.com

 Contact: Wilson